我在ansys中几何建模,然后定义材料、划分网格都没问题,定义约束也没问题,但等我施加完载荷时,跳出来一个警告框:“Both solid model and finite element model boundary conditions have been applied to this model. As solid loads are transferred to the nodes or elements, they can overwrite directly applied loads.” 接着求解就无法完成了,最后ansys自动退出了!
在错误日志中还有一个警告框“Use of the -M switch is no longer recommended for normal ANSYS use. ANSYS now dynamically allocates memory as needed. Only use the -M switch if you are certain that you need to do so. ”